Tags:Sanitary Ware    Brass Valves    Drinking Water Faucets

There are a different variety of taps used in the bathroom and kitchen industries some of which are easier for one to fit their selves than others are. Nowadays taps aren't the same style designs as what they used to be they all have their own unique style within them which is what makes products more popular these days. Tap styles range in a large variety from chrome styled to brass and even roman slate - which would be a more expensive purchase. Taps do not cost a dear lot so it's always wise to purchase a new set when renovating or modifying your bathroom looks to your required tastes.

Fitting the taps isn't an easy job neither is it a job for the faint hearted, make sure you provide yourself with a lot of space and have the basic plumbing skills required so you know how to turn the water on and off when need be. You would have to start the job be acquiring some safety equipment such as goggles and gloves if needed - then the tools needed to proceed with removing the old taps and replacing them with new ones.

All taps are manufactured at the same size standard connectors so most of them are compatible with baths and sinks used today. Some baths and sinks however do not hold this same size standard compatibility so a bit of drilling and moving of the taps is a requirement in some cases.

Depending on what sort of taps you purchase, if your bath contains just one hole then it's possible for you to use a mono-block mixer - which has two tiny pipes sitting above the hole surface containing hot and cold water. If you have two holes in your bath then it's possible to have two separate taps or a joint tap containing one spout.

The first step in fitting your new bathroom taps is to turn off the water supply and turn all taps onto full power to drain any excess water that will still be contained in each water pipe. Each tap normally comes with a plastic connector - so when your taps are fitted into the holes of your basins you'll then be able to connect them to the water pipes. This can be problematic if you run into any leaks which could mean running a detailed investigation of the pipe work - or simply tightening the tap connectors.The news come http://www.bossgoo.com/