Hydraulic control valve as used in industrial applications are built in several pressure ranges. The majority of present applications are in the range of 0 to 1500 lb per sq in., but the trend is toward higher pressures. Various types of valves are used in hydraulic systems to control or regulate the flow medium. Hydraulic valves contain and transfer the flow and pressure of hydraulic fluid in hydraulic power systems. They range from simple shutoff valves to precision control valves. Common types of hydraulic valves include angle, ball, block and bleed, check, control, cartridge, directional, drain, needle, poppet, pressure relief, safety, shut off, solenoid, spool, and stack mounted valves. In their unpowered state, hydraulic valves can be normally open (open center) or normally closed (closed center). Hydraulic control valve with a tandem center connect the pressure and tank ports, but block the service ports to allow system unloading and isolation of the service lines. Devices with a float center allow the supply to be shut off and enable the load to move to other services. We can manufacture and supply Hydraulic control valves according to your requirementsplease feel free to contact us !