News - ZHEJIANG KINGSIR VALVE CO.,LTD.

Home > News

Pipe Fitting [2009-08-04]
Kee Industrial Products' model 265 slip-on, structural pipe fitting fixes guard railing and balustrades to walls, parapets, steps, and ramps. The fitting features an offset barrel to provide clearance for overhangs and cappings. Available in two sizes to suit standard ANSI Schedule 40 steel pipes, the fittings are designed so that the horizontal rail cannot drop through the socket. Constructed of cast-iron for strength and durability, the fittings are galvanized for corrosion resistance. The news.come from www.bossgoo.com
Tonic Sanitaryware [2009-08-04]
Elegance and simplicity are introduced to the bathroom with the complete release of the Ideal Standard â€˜Tonicâ€™ Sanitaryware range. The delicately smooth lines represent an uncomplicated, seamless approach to bathroom design. Incorporating a range of both basins and toilets this modern collection of bathroom fixtures is sure to make a statement in contemporary design. Chose between the stylishly sleek wall hung basin or organic above counter vessel. Both are finished in a stark white glazing constructed with a Fine Fire Clay. The toilet delivers design simplicity featured...
Umbrella Check Valves [2009-07-30]
Umbrella check valves, injection molded of liquid silicone rubber by Minnesota Rubber & Plastics, have high strength and good flexibility. These check valves, when molded of liquid silicone rubber (LSR), improve design function and cost efficiency over similar parts using traditional millable gum processes. LSR components are used in a wide range of plumbing applications including faucets, water softeners, and toilets. These component seal applications require long term seal life where temperature variation and resistance to aging are important design considerations. Uninterrupted...
Check valves have BSPP, NPT, SAE connections [2009-07-30]
Inline check valves have BSPP, NPT, SAE connections An extended range of hydraulic check valves now include a complimentary SAE range to provide a comprehensive selection for hydraulic engineers. Whilst increasing the size coverage of their BSPP and NPT check valve ranges, Hydraulic System Products have also introduced a complimentary SAE range to provide a comprehensive selection for hydraulic engineers. The extended range now means that BSPP thread options are in eight sizes ranging from andfrac14;" to 2" with rated flows from 23 to 550 litre/min, NPT thread options ar...
Check valves reduce costly maintenance on turbines [2009-07-30]
At Power-Gen Middle East Exhibition, Parker Instrumentation is showing a unique new family of check valves, specially optimised for the high temperatures and aggressive media found in turbine installations. Now field proven in service in US dual-fuel power generation installations, the superior performance of the valves can eliminate costly turbine shut downs that can be required for repairs, maintenance, and fuel changeovers. The CB Series of check valves provides a simple means of adding protection in any system where back flow or pressure might cause a problem or damage. A ty...
Bibcock nozzle extension [2009-07-30]
1. Field of the Invention The instant invention relates to a fluid delivery pipe extension and more particularly to an outdoor bibcock nozzle extension to provide a manually accessible hose connection to outdoor bibcocks that are difficult to manually access because the bibcock threaded outlet hose connector is too close to a wall or spicket handle. 2. Description of the Prior Art An outdoor house bibcock typically comprises a valve body with a manually rotated stopcock that terminates in a male threaded nozzle outlet. A bibcock is mounted on an outside dwelling wall and connects to a...
Bathroom Taps and Bath panels are indispensable for bathroom design [2009-07-30]
â€œPlastic bathroom taps are very cheap and very low quality. They are very light and are offered in a variety of colors. Plastic bathroom taps cannot be recommended for bathroom use because of their poor performance and short expected operational life. The standard brass bathroom taps is regularly used in modern bathroom for great looks and durabilityâ€ says Mr. James Chapman of bella bathrooms Speaking about bath panels, Mr. James Chapman said â€œAn easy way to add value to your house is to convert half bathrooms into full baths or three quarter bathrooms. This can be easi...
2009 â€“ A year of change in the bathroom [2009-07-30]
There are significant changes ahead in the UK Building Regulations and everyone involved in the bathroom industry should be aware of whatâ€™s on the cards. We will all be affected, in some way, in the year ahead. A positive approachSustainability and water efficiency are the current buzz words and the bathroom industry has been responding positively and quickly to the new demands from consumers and government for an eco-friendly approach to bathroom product design.Consumers are becoming more â€˜eco-awareâ€™. There has been much in the media about the effects of our very exis...
globe valves [2009-07-14]
A ball valve is a valve that opens by turning a handle attached to a ball inside the valve. The ball has a hole, or port, through the middle so that when the port is in line with both ends of the valve, flow will occur. When the valve is closed, the hole is perpendicular to the ends of the valve, and flow is blocked. The handle or lever will be inline with the port position letting you "see" the valve's position. The ball valve, along with the butterfly valve and plug valve, are part of the family of quarter turn valves. Ball valves are durable and usually work to achieve perfect shut...
the diaphragm valve [2009-07-14]
Originally, the diaphragm valve was developed for use in non-hygienic applications. Later on the design was adapted for use in the bio-pharmaceutical industry by using compliant materials that can withstand sanitizing and sterilizing methods.There are two main categories of diaphragm valves: one type seals over a "weir" (saddle) and the other (sometimes called a "straight-way" valve) seals over a seat. The main difference is that a saddle-type valve has its two ports in line with each other on the opposite sides of the valve, whereas the seat-type has the in/out ports located at a 90 deg...
Upgrade your Drain Valve [2009-07-14]
Many water heaters come with a drain valve that has a cone shaped handle. They spell trouble. Other makers of water heaters have a plastic faucet type drain valve. This type of drain valve is prone to breaks and leaks. The better types are the brass hose bibb, not unlike the average garden hose bibb. Even better would be brass ball valve. This type of drain valve would have a lever that can either be open or shut. The brass ball valve allows the most effective flushing of the water heater. On most residential water heaters a 3/4 inch brass gate valve can be installed. Ball valves allo...
Ball Valve's Installation [2009-07-14]
1), Check the preparation work before installation 1. Make sure the installation site pipeline is coaxial and the two flanges on the pipeline should keep parallel; confirm the pipeline could support the ball valve's weight. If not, an appropriate support needs to be equipped on the pipeline before installation.2. Confirm whether there is impurity and welding slag, etc or not in the pipeline. For it must be clean.3. Check the ball valve's nameplate and do full open and full close operation on ball valve for several times. Check it could be normal operation and excellent without damage.4....
The ball valve controls the flow [2009-07-14]
Many water heaters come with a drain valve that has a cone shaped handle. They spell trouble. Other makers of water heaters have a plastic faucet type drain valve. This type of drain valve is prone to breaks and leaks. The better types are the brass hose bibb, not unlike the average garden hose bibb. Even better would be brass ball valve. This type of drain valve would have a lever that can either be open or shut. The brass ball valve allows the most effective flushing of the water heater. The ball valve controls the flow and temperature of the water by using a steel ball. The...
Do you know more about Brass ball valve [2009-07-14]
Ball valves has a muted yellow color, somewhat similar to gold. It is relatively resistant to tarnishing, and is often used as decoration and for coins. In antiquity, polished brass was often used as a mirror. Brass is the proportions of zinc and copper can be varied to create a range of brass ball valvewith varying properties.In comparison, bronze is principally an alloy of copper and tin. Despite this distinction, some types of brasses are called bronzes. Brass is a substitutional alloy.www.brassvalvechina.com It is used for decoration for its bright gold-like appear...
New brass-bodied general purpose solenoid valves [2009-07-14]
A new range of general purpose, brass bodied, direct acting solenoid valves from Asco Joucomatic is designed to provide fast, efficient and reliable on/off , feeding, piloting and venting functions on water, air neutral, gas and oil at pressures up to a maximum 40 bar. The new range comprises three series of direct acting G1/4 valves (272, 370 and 374), all with robust, corrosion resistant brass bodies, offering normally closed (NC), normally open (NO) and universal functions (U). The valves operate with air, water, neutral gases and oil, and can also be used with fluids which requi...
Sediment Build-Up Can Kill A Water Heater. Here Are Some Removal Strategies [2009-07-14]
Bacteria Problems In Water HeatersSediment causes many problems in your water heater. Among these is bacterial growth. These aren't typically disease causing bacteria, but they do oxygenate and corrode the lining of a water heater. This is compounded with high amounts of heat and sediment can be very destructive.Remember, if you can detect a sulfur smell or rotten-eggs odor, you may have a bacteria problem in your water heater. Don't be confused by a potential natural gas leak which can have a similar smell. They are both serious problems which need to be corrected immediately.Build-...
Sediment Build-Up Can Kill A Water Heater. Here Are Some Removal Strategies [2009-07-08]
Bacteria Problems In Water HeatersSediment causes many problems in your water heater. Among these is bacterial growth. These aren't typically disease causing bacteria, but they do oxygenate and corrode the lining of a water heater. This is compounded with high amounts of heat and sediment can be very destructive.Remember, if you can detect a sulfur smell or rotten-eggs odor, you may have a bacteria problem in your water heater. Don't be confused by a potential natural gas leak which can have a similar smell. They are both serious problems which need to be corrected immediately.Build-...
New brass-bodied general purpose solenoid valves [2009-07-08]
The new range comprises three series of direct acting G1/4 valves (272, 370 and 374), all with robust, corrosion resistant brass bodies, offering normally closed (NC), normally open (NO) and universal functions (U). The valves operate with air, water, neutral gases and oil, and can also be used with fluids which require special sealing material such as FPM (fluoroelastomer/viton) or EPDM (ethylene-propylene). The 272 (2/2) versions are ideally suited for circuit opening and closing in sectors such as the food processing industry, air conditioning, and industrial laundering. The 3...
Ball Valve's Installation [2009-07-08]
1), Check the preparation work before installation 1. Make sure the installation site pipeline is coaxial and the two flanges on the pipeline should keep parallel; confirm the pipeline could support the ball valve's weight. If not, an appropriate support needs to be equipped on the pipeline before installation.2. Confirm whether there is impurity and welding slag, etc or not in the pipeline. For it must be clean.3. Check the ball valve's nameplate and do full open and full close operation on ball valve for several times. Check it could be normal operation and excellent without damage.4....
Avoid Leaks at the Bottom of your Water Heater: Upgrade your Drain Valve [2009-07-08]
Many water heaters come with a drain valve that has a cone shaped handle. They spell trouble. Other makers of water heaters have a plastic faucet type drain valve. This type of drain valve is prone to breaks and leaks. The better types are the brass hose bibb, not unlike the average garden hose bibb. Even better would be brass ball valve. This type of drain valve would have a lever that can either be open or shut. The brass ball valve allows the most effective flushing of the water heater. On most residential water heaters a 3/4 inch brass gate valve can be installed. Ball valves allo...

< 1 2 3 4 5 6 7 8 9 > Last

Contact Us

Company Name: ZHEJIANG KINGSIR VALVE CO.,LTD.
Contact Person: ARICO JIN
Tel: 0086-576-87427772
Fax: 0086-576-87427771
Mobile Phone: 0086-13666840000
Email: mail@cn-kingsir.com
Factory Add.: No.10 Fengyu East Rd. Yuhuan Enconomy Development Zone,Taizhou,Zhejiang,China.
Zip: 317605
WebSite: http://www.kingsirvalve.com

Product Catalogue